charger SPV C500 [Archive]

Own

06-13-2006, 22:56

@all
i need charger pinout for spv c500 [ i tried with moto V3 , it not work]how to do? or i need schematic of spv c500.
br all :confused: :confused: :rolleyes:

Naresh

06-14-2006, 11:36

use USB-cable for charging (means u can charge ur handset using usb data cable with computer

regards
Naresh

Own

06-14-2006, 20:21

Thanks. but i tried charging with charger pocket pc but not work , and i will try with it.and result you again.:eek:

Naresh

06-16-2006, 09:03

hi
first u should load Activesync
then connect ur handset with usb cable.
if it will show cable connected on handset's LCD
then connect u handset for minimum 2 hours with pc if ur hanset charged
then check 5volt pin in usb cable .
& change the pins in the ur charger (moto v3) for 5volt

NOTE
if not chaged with cable & donot show cable connected on LCD then check ur charging connector

i'm charging my c500 as i explain with usb cable

Enjoy good luck
Naresh

Own

06-16-2006, 21:03

i tried many way but still not charge , i think my phone not work[charging]and i need schematic for spv c500 for fix it
Thank you for all infomation but i want the schematic :confused: :confused: :(

geosan1638

06-16-2006, 21:25

1 2 3 4 5

1 according to USB spec : +5 VDC
4 use a 50k rezistor to ground
5 GND -?- Pin 4 according to USB spec : GND

If i remember this is how i did a charger for c500 a while ago.If it will not work let me know

Own

06-16-2006, 21:39

@geosan1638
pin 4 it good info. [i want it so long time]
BIG thank you:D :D
ps: i will try tomorow and result you

Own

06-21-2006, 20:51

@geosan1638
i tested it work! :D

dominik

07-12-2006, 15:30

For me it works only for 15 sec and after orange light it start green light and not charging.
I made charger from V3 charger 50k OK charger gives 5.3v out.What am I doing wrong???
WBR

geosan1638

07-12-2006, 16:58

the charger must have about 5v AND 1A(amper) If not it will not charge .

WBR

pawns

11-22-2006, 21:54

Which voltage C500 must have? 5.15 or 5.00 ?

usernome

04-28-2007, 15:41

tomthumb

04-29-2007, 01:36

I'm having problems with car chargers for the c500. I bought two from ebay and they do not work, obviously the sellers are not aware that the c500 is very fussy when it comes to charging.

One seller even confirmed they definately worked on a c500 before I won his item. The chargers are fine when used to charger other mini usb devices but they do not charge the c500 due to the power/data stream.

geosan1638

04-30-2007, 16:33

Can you be more specific please ?

Thanx !

what eles do you need to know?

usernome

05-14-2007, 09:16

what eles do you need to know?

A schematic ...

Thanx !