Samsung Z107 UNLOCK SOLLUTION FREE - GSM-Forum

forhike · 01-20-2005, 16:35

If you are locking for samung z107 unlock sollution, why don't you just try with same program that you have when unlocking a z105?

simple use. com connector and short tx and rx pin 2-3 on the (com)
use samsung original usb cable PCB157ULE

1. plug in phone install usb drivers
2. open QIWS_V1.16(Service)_041011.exe
3. plug in com adapter (tx and rx shorted)
4. check if program finds samung modem. (if not found, go back to 1)
5. press ok
6. press unlock, (if you get usb error try to go to 4 and change the usb comport manualy to something else)
7. if phone unlocked insert a gsm card (if you have problem with network just change it manualy to gsm instead of automatic)

links for program and cable information can be found here...
http://forum.gsmhosting.com/vbb/showthread.php?t=173873

i have nothin more to say...

exept.... why but agere attack when they probably use same sollution themself for z105 and z107

SJS · 01-20-2005, 19:58

Yes. Working perfect. Thank you!

Vervolf · 01-22-2005, 00:46

good news... regards

gsm_koksi · 01-22-2005, 12:28

i have here a problem

i try it with a z100 datacable
connected pin 2-3 in female DB9 and to the green cable in the samung usb cable with a switch

samsung modem is in port 14

Serial com...Good
WAIT! Detect USB Port
Sucess: direct USB Port...
Searching Samsung Modem...
Usb Port Open Sucess
Lock Read Fail

any ideas where the failure can be?
thx

SJS · 01-22-2005, 12:34

Also: You don,t need modify original samsung z107 cable. And change modem port to 4 or 5. Under 10. that works!

gsm_koksi · 01-22-2005, 12:50

yes, this was the tiny failure

change port and work

thx stefan

theXtreme · 01-22-2005, 14:45

working perfect
thanx mate ....

drdjolens · 01-27-2005, 11:39

Nice work.

Thx.

**GSM MIND** · 01-27-2005, 20:54

me try to make this cable and hope it will work for me

REGARDS

GSM MIND
STAND ALONE

tele-teknik · 01-27-2005, 21:19

Nice work.

Thanks.............

iserlohn · 01-27-2005, 22:18

No need to make the cable. Just use the original USB cale, and then make an adapter that short out pins 2 and 3 on your COM1. (You can just use a piece of wire to do this)

The software only checks the carrier on the COM port, and then it uses the USB serial port to do the unlock.

Own · 01-28-2005, 01:10

@forhike
all work .....i tried with green wire more but not and i tried your solution ALL WORK and resolve phone freeze
BR
Own

but winimei z105 work with Z110?

Nemooo · 01-30-2005, 14:32

WORKS!! great! Thanks forhike

forhike · 01-30-2005, 16:12

Quote:

Originally Posted by tele-teknik

Nice work.

Thanks.............

hehe perhaps it was bad move to write the sollution here =p
where are you from ?

forhike · 01-30-2005, 16:13

Quote:

Originally Posted by Own

@forhike
all work .....i tried with green wire more but not and i tried your solution ALL WORK and resolve phone freeze
BR
Own

but winimei z105 work with Z110?

i don't have any z110 for testing =/
does it exist in europe? or is it asia modell ?

01-20-2005, 16:35	#1 (permalink)
forhike No Life Poster Join Date: Aug 2002 Location: Up North Posts: 900 Member: 14934 Status: Offline Thanks Meter: 79	Samsung Z107 UNLOCK SOLLUTION FREE If you are locking for samung z107 unlock sollution, why don't you just try with same program that you have when unlocking a z105? simple use. com connector and short tx and rx pin 2-3 on the (com) use samsung original usb cable PCB157ULE 1. plug in phone install usb drivers 2. open QIWS_V1.16(Service)_041011.exe 3. plug in com adapter (tx and rx shorted) 4. check if program finds samung modem. (if not found, go back to 1) 5. press ok 6. press unlock, (if you get usb error try to go to 4 and change the usb comport manualy to something else) 7. if phone unlocked insert a gsm card (if you have problem with network just change it manualy to gsm instead of automatic) links for program and cable information can be found here... http://forum.gsmhosting.com/vbb/showthread.php?t=173873 i have nothin more to say... exept.... why but agere attack when they probably use same sollution themself for z105 and z107

01-28-2005, 01:10	#12 (permalink)
Own No Life Poster Join Date: Aug 2001 Location: Minsk Russia Posts: 915 Member: 5569 Status: Offline Thanks Meter: 10	all work @forhike all work .....i tried with green wire more but not and i tried your solution ALL WORK and resolve phone freeze BR Own but winimei z105 work with Z110?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
i ned Samsung Z105 UNLOCK SOLLUTION FREE	touta1	QUALCOMM Models (3G)	0	09-18-2008 17:48
Help Samsung Z107 Unlock	blueaurabd	QUALCOMM Models (3G)	5	06-29-2007 12:35
Samsung Z107 Unlocking	afrodizzy	FuriouS II	7	11-18-2005 20:51
Samsung E800 Unlock Code, Free	gaz_0001	SYSOL Platform	10	05-04-2005 21:31
samsung d500 unlocking for free	ronnyj1	SWIFT Platform	4	12-18-2004 10:33

01-20-2005, 19:58	#2 (permalink)
SJS No Life Poster Join Date: Aug 2002 Location: Austria-Velden Age: 29 Posts: 860 Member: 14684 Status: Offline Thanks Meter: 60	Yes. Working perfect. Thank you!

01-22-2005, 00:46	#3 (permalink)
Vervolf Freak Poster Join Date: Nov 2004 Location: Poland Age: 44 Posts: 153 Member: 90171 Status: Offline Thanks Meter: 0	good news... regards

01-22-2005, 12:28	#4 (permalink)
gsm_koksi Junior Member Join Date: Jul 2004 Posts: 6 Member: 71908 Status: Offline Thanks Meter: 0	i have here a problem i try it with a z100 datacable connected pin 2-3 in female DB9 and to the green cable in the samung usb cable with a switch samsung modem is in port 14 Serial com...Good WAIT! Detect USB Port Sucess: direct USB Port... Searching Samsung Modem... Usb Port Open Sucess Lock Read Fail any ideas where the failure can be? thx

01-22-2005, 12:34	#5 (permalink)
SJS No Life Poster Join Date: Aug 2002 Location: Austria-Velden Age: 29 Posts: 860 Member: 14684 Status: Offline Thanks Meter: 60	Also: You don,t need modify original samsung z107 cable. And change modem port to 4 or 5. Under 10. that works!

01-22-2005, 12:50	#6 (permalink)
gsm_koksi Junior Member Join Date: Jul 2004 Posts: 6 Member: 71908 Status: Offline Thanks Meter: 0	yes, this was the tiny failure change port and work thx stefan

01-22-2005, 14:45	#7 (permalink)
theXtreme Freak Poster Join Date: Mar 2004 Age: 47 Posts: 175 Member: 58522 Status: Offline Thanks Meter: 10	working perfect thanx mate ....

01-27-2005, 11:39	#8 (permalink)
drdjolens Freak Poster Join Date: Jul 2003 Location: Novi Sad - Serbia Age: 49 Posts: 120 Member: 33912 Status: Offline Thanks Meter: 3	Nice work. Thx.

01-27-2005, 20:54	#9 (permalink)
GSM MIND Product Manager Join Date: Feb 2003 Location: Your Exclusive Source Posts: 2,881 Member: 20645 Status: Offline Sonork: 100.1579175 Thanks Meter: 635	me try to make this cable and hope it will work for me REGARDS GSM MIND STAND ALONE

01-27-2005, 21:19	#10 (permalink)
tele-teknik No Life Poster Join Date: May 2004 Location: turkey Age: 48 Posts: 650 Member: 64598 Status: Offline Thanks Meter: 54	Nice work. Thanks.............

01-27-2005, 22:18	#11 (permalink)
iserlohn Junior Member Join Date: Jan 2005 Age: 44 Posts: 3 Member: 109058 Status: Offline Thanks Meter: 0	No need to make the cable. Just use the original USB cale, and then make an adapter that short out pins 2 and 3 on your COM1. (You can just use a piece of wire to do this) The software only checks the carrier on the COM port, and then it uses the USB serial port to do the unlock.

01-30-2005, 14:32	#13 (permalink)
Nemooo Junior Member Join Date: Jan 2005 Age: 44 Posts: 3 Member: 111671 Status: Offline Thanks Meter: 0	WORKS!! great! Thanks forhike